Setup

 As Jumpbooks are sold or refunded at the registers, the POS system will

communicate with the Jumpbooks server via WPServer on the POS distributed server or Communications Admin. Please contact PrismCore support to add the Jumpbooks line to WPServer. Additionally, A/R must be enabled in PrismCore in order for Jumpbook information to flow properly. Finally, port 443 must be open securely, using TCP/IP outbound, on the POS Admin.

 If a Jumpbook exists on the transaction, an “Authorizing Jumpbooks” window will display on screen while WPServer communicates with the Jumpbooks server.

 If a Basket ID/Access Code is successfully obtained from the Jumpbooks server, the transaction will clear from the register and the receipt will print. Any receipt containing a Jumpbook will include the instruction attached to the Jumpbook in the Jumpbooks module (See ‘Understanding the POS Receipt’ section of this document).

 It should be noted that if the instruction entered in the Jumpbook Instructions module includes a <b> tag, then the Basket ID/Access Code obtained from the Jumpbooks server would replace the <b> tag, and print within the instruction on the bottom of the WinPOS receipt (See ‘Understanding the POS Receipt’ section of this document).