PrismPOS 1.9.4
Buy One Get One (TFS3343)
Buy on get one (BOGO) discount had not worked correctly in PrismPOS. This has been corrected.
...
The <IsOpen><IsOpen> flag has been added to all packets. In addition, the store was automatically reopening after it was closed. This has been fixed so that the store does not re-open automatically after it has been closed.
Made to Order Discount (TFS3338)
...
An indicator flag has been added to the Admin Cloud Tool for 'Closed store notification'. Users now have three different options to choose from.
Ignore closed flag - Allows users to process transactions as they have in the past with the store closed.
NOTE: Using this will cause transactions not to flow to system until the store opens; in addition transactions are dated for the day the store has opened, not the day they were processed.
Show close notification - Will show a yellow message with red wording at the top left corner, noting "Store Closed".
Stop transactions –Will show a message box "store is closed, transactions cannot be completed"
This new parameter can be set in the Admin Tool by going to "POS", select store location, click on Parameters, and then use "Store closed notification type" drop down to select the parameter. Then, press the "save" button at the bottom of the page.
NOTE: This feature will check to see if the store is opened for the "current" date not a previous date. If you forgot to close the store on the 1st, your store is still opened for the 1st. However it is not opened for the 2nd, so a message will display that the store is "closed", even though it is opened from the 1st. You will need to close and reopen for the 2nd.
Process Date Change (TFS2234)
...
Datatel Balance Inquiries and Datatel split tendered transactions were not working. These issues have been fixed so that split tendered Datatel transactions can be completed as well as Datatel Balance Inquiries.
Swiping a Customer
...
Card (TFS3769)
Code has been added to allow a customer to be added by swiping a customer card. The Customer Card is setup in Thunder Admin Tool > MSR. The "Is Customer Card" flag must be checked. If the length of the card swiped is equal or greater than the Length field set in MSR the card will be read and can be added with the following message being given: "Customer not found - Would you like to add customer (customer number)". Pressing "No" will cancel the add, pressing "Yes" will take the user to the Customer Details screen to add the customer. The customer number will automatically be filled in. If the length of the card is less than the length set in the Length field, the message "The application encountered an error. Please try again" is given.